Simpliguides › Email › Outlook
How to fix an Outlook email stuck in the Outbox
An email that sits in the Outbox has been accepted by Outlook but never handed to the mail server. The usual causes are Outlook being set to Work Offline, an attachment too big for the server, a message that was opened before it went, or an add-in getting in the way. This guide works through them in order, from the most common to the least. It covers classic Outlook for Windows, the version with a File menu and a ribbon with a Send / Receive tab. The new Outlook and Outlook for Mac are under Variations.
What you'll need: Classic Outlook for Windows with at least one email account set up. A working internet connection — check a web page loads before you start.
Check whether Outlook is set to Work Offline
Look at the status bar along the bottom of the Outlook window. If it says Working Offline, nothing will send until you turn that off. Click the Send / Receive tab on the ribbon and click Work Offline. The button is shaded blue while offline and turns back to normal once you click it.
The status bar should change to Trying to connect… and then Connected. If it says Need Password instead, click those words and sign in to the account.
Force a send
Press F9, or click Send/Receive All Folders on the Send / Receive tab. Outlook tries to send everything in the Outbox straight away.
Open the Outbox and look at the message
In the folder list on the left, click Outbox. A message that is still queued to send is shown in italics. A message shown in ordinary upright text has been opened since it was sent, and Outlook has quietly taken it out of the queue. It will stay there until you send it again.
Open the message and click Send again
Double-click the message to open it, check the recipients are right, and click Send. This puts it back in the queue. It should leave the Outbox within a few seconds and appear in Sent Items.
If it does, you're done. If it sits there again, carry on.
Read the Send/Receive error
On the Send / Receive tab, click Show Progress, then click the Errors tab in the window that opens. This tells you why the server turned the message down. Wording about size, the attachment or the message being too large points to step 6. A sign-in, password or authentication error means the account needs you to sign in again — see Troubleshooting.
Deal with a large attachment
Classic Outlook refuses attachments over 20 MB on an ordinary internet email account, and many mail servers reject anything much smaller than that. Drag the stuck message from Outbox into Drafts, open it from there, and right-click the attachment and choose Remove Attachment.
Attach the file again with Attach File on the Message tab, and this time pick Upload and share so the recipient gets a OneDrive link instead of the file itself. A link does not count towards the size limit. Click Send.
Rule out an add-in
Close Outlook. Press the Windows key + R, type the line below and press Enter. Outlook opens in safe mode with every add-in switched off.
outlook.exe /safePress F9. If the message sends now, an add-in was blocking it. Close Outlook, open it normally, go to File › Options › Add-ins, set the Manage drop-down at the bottom to COM Add-ins and click Go. Untick the add-ins you don't recognise or need, click OK, and try sending again.
Delete the stuck message and send a fresh one
If nothing else has worked, the message itself is the problem. First click Work Offline on the Send / Receive tab so Outlook stops trying to transmit it. Then open Outbox, select the message, and press Shift + Delete to remove it for good.
Click Work Offline again to go back online, write the email from scratch and send it.
Variations
Neither has a Work Offline button, and neither shows the italic-versus-upright difference. Click Outbox in the folder list, open the message and click Send again. If it stays put, check your internet connection, then delete the message and send a new copy. Attachments too big for the server are usually refused with a warning while you compose, rather than getting stuck afterwards.
The offline switch lives in the menu bar: click the Outlook menu and look for a tick next to Work Offline. Click it to remove the tick. Then open Outbox in the sidebar, open the message and click Send.
Outlook can be set to hold outgoing mail until the next scheduled send. Go to File › Options › Advanced, scroll to Send and receive and tick Send immediately when connected. Click OK.
Troubleshooting
Outlook is mid-way through a send it can't finish. Click Work Offline on the Send / Receive tab, wait a minute or two, and try the delete again. If it still refuses, close Outlook completely, open it again, and delete the message before turning Work Offline off.
That is an account or connection problem rather than a bad message. Check the status bar: Disconnected means Outlook can't reach the server, and Need Password means it can but hasn't been allowed in. Click Need Password to sign in. If the account was recently changed by your employer or provider, go to File › Account Settings › Account Settings…, select the account and click Repair.
Look in Sent Items. If a copy is there, the recipient has it and the Outbox entry is a leftover. Delete the Outbox copy using step 8 so Outlook doesn't send it a second time.
Need a calculator rather than a guide? Try Simplicalcs →